The Huawei P8 has the function "Double Tap to Wake" integrated. With this function you can wake up your Huawei P8 from the stand-by by tapping twice on the screen. This feature is very convenient because you don´t have to press the power button to turn off the stand-by of the smartphone.

However, the Huawei P8 often does not respond to this display command, which means that the user must repeatedly tap the screen before "Double Tap to Wake" works. As this is rather annoying, we want to give you here two tips to help you and to make better use of this feature on your Huawei P8:

1. Tip

Increase the sensitivity of the Huawei P8 display by activating the glove mode. This mode is set in the following Android submenu :

Open Menu --> Settings --> Smart Support --> More --> Glove mode

Use the slider to activate it. The sensitivity of the screen is then higher than before. This should be beneficial to the recognition of "Double Tap to Wake"

2. Tip

If you use a screen protector, then please check whether it lies right on the screen. It is quite possible that thicker screen protectors interfere with the function "Double Tap to Wake". Here then only the possibility remains to replace it with a thinner film, or to use it completely without it.

You now know two ways to optimize the Double Tab to Wake function on your Huawei P8 so that your entries are better recognized.

If your Samsung Galaxy S6 does not work smooth in the menu and when opening apps and does not play the animation at the transitions correctly, then one of the following tips helps most of the time. These workarounds for your smartphone we would like to introduce here:

Tip #1 to finish stuttering on your smartphone

If your smartphone is turned on a very long time, then the background processes and temporary files add up and slow down the Samsung Galaxy S6.

It happens that transition animations are no longer running smoothly. It comes to "stuttering". The easiest way is then simply turn off the Samsung Galaxy S6 and restart it again after about 10 seconds. Thus, the system is rebooted and ended the outdated processes.

Tip #2 to terminate a bucking at animations

Often temporary files are the cause of a judder of animation transitions in Android. This can be most easily fixed by a Wipe Cache partition. This only deletes the old system files. Private files are not deleted, so this method is very easy to perform.

A Wipe Cache partition works on your Samsung Galaxy S6 as follows:

Turn off your Samsung Galaxy S6 completely. Then press and hold the following key combination to turn the phone back on:

• Power On / Off
• Volume +
• Home button

When the Samsung Galaxy S6 vibrates once, release the power on / off button but keep the other two keys from the key combination pressed until a small menu appears on the screen. Now mark the entry "Wipe Cache partition" with the volume down key. With the Power On / Off button, the entry is selected and the process is started.

This usually takes only a few seconds. Then the previously displayed menu reappears. Now selects the first entry with "Reboot system now" and executes the command again with a pressing of the power button. Your Samsung Galaxy S6 will now reboot.

Tip #3 Our last tip

Also the power saving mode on your Samsung Galaxy S6 may be the cause for stuttering on the Android menu and when opening apps. Because of the reduced performance the animations are no longer rendered as smooth as it would be the case without the power saving mode.

Tests how the bucking is affected with deactivated energy saving mode.

You now have learned various options and reasons for bucking within the Android menu or when opening apps.

We hope that your Samsung Galaxy S6 operates now smoothly.

If you have heard of the name Stagefright in connection with your Android smartphone, then you already know that this is a malicious software through which attackers can harm you and your smartphone.

This is of course very unpleasant and which is why you absolutely should consider whether your own Android smartphone is affected by Stagefright. But how can you check your smartphone? We answer this question in this article:

To test your smartphone on the Stagefright vulnerability , you need the App "Stagefright Detector" from the Google Play Store. Here the download link.

After you have installed the app on your Android smartphone, proceedas follows:

1. Open the Stagefright Detector on your Android smartphone

2. Tap on "Begin Analysis"

3. There are now two possible results:

• Not Vulnerable
• Vulnerable

If your Android smartphone is affected, please check whether a new firmware is available for your smartphone that makes the device safe again and closes the gap of Stagefright.

Maybe you notice on the iPhone 6S that the battery indicator in the status bar is yellow instead of green. Should you now wondering what the yellow battery indicator means, then we would like to answer this question.

The yellow battery indicator represents an activated energy saving mode. Is this mode activated in the settings of iOS 9, then the color of the battery icon turns from green to yellow.

Should you have accidentally activated the power saving mode on the iPhone 6S and want to turn this off, then this works very simply as follows:

To disable the power-saving mode on the iPhone 6S please follow these steps:

1. Open from the Home screen the Settings

2. Navigate on: "Battery"

3. Now use the slider at "power save mode" to disable this mode.

The battery icon in the status bar will now change back from yellow to green. So now you know what it means when the battery icon in the status bar of the iPhone 6S indicates yellow.

If you do not know on your iPhone 6S with iOS how to activate the energy saving mode, then this article should help you. Because the power-saving mode allows you to optimize the battery consumption of the smart phones and leads to longer battery life.

To activate the power saving mode on the iPhone 6S, you need to navigate into the following submenu of iOS 9.

1. Open the menu and then the Settings

2. Navigate to: battery

3. Enable now by using the slider the saving of battery power.

You have now successfully activated the energy saving mode of your iPhone 6S. You recognize this by the fact that the battery indicator is now yellow.

Should you own a smartphone by Sony and ask if this gets the newly released Android 6.0 marshmallow, then we would like to give you some information.

Currently it looks as if the following Sony Xperia models will receive an update to Android 6.0:

• Xperia Z5
• Xperia Z5 Compact
• Xperia Z5 premium
• Xperia Z4 Tablet
• Xperia Z3 +
• Xperia Z3
• Xperia Z3 Compact
• Xperia Z3 Tablet
• Xperia Z2
• Xperia Z2 Tablet
• Xperia M5
• Xperia C5Ultra
• Xperia M4 Aqua
• Xperia C4

Sony has promised an update on his website for these models. Whether and when this Sony smartphones receive the new Android 6.0 marshmallow remains to be seen, but will probably happen within the next 3-6 months.

Who uses on his new iPhone 6S the function of 3D touch may feel the pressure sensitivity of the screen for too easy or too tight. Whoever is not satisfied with the default setting of 3D Touch can change the pressure sensitivity in the system settings of iOS.

We show you how you can find this option. Navigate to the following submenu on your smartphone:

Home screen --> Settings --> General --> Accessibility --> 3D Touch

Whenever you're standing in the sub-menu of 3D touch, then you can see a scale within the section "3D Touch Sensitivity". There are three different settings for 3D Touch:

• Easy
• Medium
• Hard

Default setting is "medium". Adjust now by moving the slider on the scale the sensitivity of Force Touch. With "easy", the sensitivity is increased with "fixed" it is reduced. With the 3D Touch sensitivity test you can easily check whether the setting is the right touch for you.

You know now how you can change the sensitivity of Force Touch on the iPhone 6S.

The iPhone 6S is equipped for the first time with a new display that has integrated the "Force Touch" technology. With Force Touch, also called "3D touch" on the iPhone 6S you can perform different functions by different strong pressure on the display.

If that's too much gimmick on your new iPhone 6S is, you can of course disable 3D Touch in the settings of iOS. Where you can find the setting exactly we tell you now precisely in this article:

Open from the home screen of your iPhone 6S the settings. Then from here navigate to:

General --> Accessibility

Tap now on "3D touch" to enter the submenu. Then you can disable on the top with the regulator 3D Touch on your iPhone 6S completely. You now know where 3D Touch on the iPhone 6S can be turned off.

In Android 6.0 Marshmallow there is the function of the new System UI tuner. With this new tool of Android, you can customize the status bar to your liking. Thus, for example, the time or the sign of the battery status can be individual hidden.

However, the system UI tuner is quite well hidden in Android Marshmallow 6.0 and has to be unlocked. We show you now how to activate the System UI Tuner on Android Marshmallow.

1. For this purpose, open from the home screen the menu, then the Settings.

2. Tap at the entry "About phone". You will now see various information on your smartphone

3. Tap now several times on "build number". This will enable the developer options.

4. After the developer options have been unlocked, they can be found in the settings. Open these options and activate them.

5. In the developer options you now find "Show System UI tuner ". Enable the option

6. Return to the Settings Overview of Android 6.0 Marshmallow back. You can find here a new menu item called: "System Ui Tuner"

7. With this mode you can now modify the status bar in Android Marshmallow 6.0.

You have now learned in our step by step guide how you can modify the notification bar on a smartphone with Android 6.0 Marshmallow.

In Android Marshmallow 6.0 there is a new function available: After creating screenshots you can delete them directly from the status bar if desired. If you have questions how to create a screenshot in the new Android marshmallow 6.0, then we want to help you here.

A screenshot is triggered by a combination of keys on Android marshmallow 6.0. However, since each smartphone has its hardware features the manufacturers place the key combination for a screenshot differently. However, the most common key combination which triggers a screenshot in Android Marshmallow 6.0 is the following:

Press and hold simultaneously the following keys:

• Power On / Off
• Volume quieter

After about holding the combination for two seconds the screenshot is triggered in Android Marshmallow 6.0 and saved. Via the status bar you can watch this screenshot quickly and delete it when needed. Generally screenshots in Android Marshmallow 6.0 are saved on the internal memory in the folder "screenshots".

You know now how you can take a screenshot with the most smartphones in Android Marshmallow 6.0. Use our search to find the screenshot hotkey of a specific smartphone.