If you surf the Internet, operate the menu or write to it with the Huawei P20 Pro, you may notice that the touch display reacts poorly or inaccurately. If this is the case with your device, the following tips will help you to optimize or reduce this behavior:
Activating the glove mode
Activating the glove mode can significantly improve the sensitivity of the Huawei P20 Pro touch screen. This workaround is often enough to set the touch screen to respond as desired. The glove mode is activated as follows:
1. First open the settings
2. On the Huawei P20 Pro. Scroll down until you see the menu entry "Intelligent Support" - Select the menu entry
3. Here you will find the glove mode - Activate it by setting the control to "active" - Done!
Remove protection film - use other film
The Huawei P20 Pro comes with a display protection film. This should protect the screen from scratches. This task also makes the film very good, but of course it also has a negative effect on the sensitivity of the screen.
Removing this screen protection film in combination with the glove mode should achieve better results.
You can also switch to another film, which may work better because it is thinner. For example, there are alternative display protection films for Amazon Soft Reset If the display of the Huawei P20 Pro does not react for a short time, you can perform a Soft Reset.
Press the Power On/Off button once for about 15 seconds until the Huawei P20 Pro restarts.
We hope that the first two tips have helped you to get the touch display of the Huawei P20 Pro to respond better to your inputs.