Anchor Soundcore flashing blue and no connection - Released

 If you have an Anker Soundcore speaker box and the status LED flashes blue after switching on and you cannot connect the box via Bluetooth to a smartphone etc., then there is most likely a problem.

The blue flashing of the LED light means that the Anker Soundcore is ready to be connected via Bluetooth.

 

However, there seems to be a problem here, because the device does not appear in the list of available Bluetooth devices on the smartphone. If this is the case for you, we want to give you a tip to get the Anker Soundcore speaker to play music again.

For this purpose the Anchor Soundcore must be reset to factory settings. This is done as follows:

Fix Anker Soundcore problems with blinking LED

1. switch on the Anchor Soundcore via the Power button

2. press and hold the Bluetooth button for at least 20 seconds

3. switches the anchor Soundcore off again.

4. switches the anchor Soundcore on again.

Afterwards, pairing a new Bluetooth device, such as a smartphone, with the loudspeaker should no longer be a problem. We hope that this simple tip helped you to solve the problem with the blue flashing LED.

 


About the Author

Manuel Solvemix Team small

Manuel has been involved with technology for more than 15 years, especially with mobile phones, smartphones and PC systems and shares his passion here in this blog. If he can help someone with a technical problem, he is especially happy about it.