If you have a problem with your Honor 10 or the error that it no longer responds to your entries on the screen or to the keystroke of the buttons, there are not many ways to make the device work again.

In any case, however, you should try the so-called soft reset. This makes it easy to restart your phone even if it stops responding. How's that supposed to work?

We have summarized this for you here:

Force restart on the Honor 10 - Soft Reset

To perform the Soft Reset on the Honor 10, press and hold the following key for about 15 seconds:

• Power On/Off key

This will now restart the device from now on, as if you were removing the battery and disconnecting the power.

The smartphone is then restarted and Android booted as usual. You now know how to perform a soft reset on the Honor 10 and thus continue to use the device if it no longer functions correctly and reacts to the entries.

The game Jurassic World Alive requires an Internet connection and of course a GPS signal to determine your location on the map. This is the only way to use the map in Jurassic World Alive to find new dinosaurs like the T-Rex.

However, you may now receive the following error message in Jurassic World Alive:

"GPS not activated - No device signal was found”

Make sure that this app allows access to your location. "If you get this error on your Android smartphone, we would like to show you the most important tips that can help you to solve the problem:

Jurassic World Alive Fix GPS signal problems on Android smartphones such as Samsung Galaxy smartphones:

Is GPS enabled on your Android smartphone?

This is the first place you should check. It is also very easy to check this. Drag the status bar on your Android smartphone from above into the screen. Here you should now see a GPS symbol. This must be selected if it is activated. If you do not see a GPS toggle, you have to open the extended view in the status bar to see all quick start toggles. If the GPS is not activated on your Android smartphone, touch the icon so that it is now marked as active.

Is the location accuracy set to "high"?

The location accuracy under Android should have been set to high. This is the only way to play Jurassic World Alive without problems. On Android, the setting is as follows: Open: Homescreen --> Settings --> Privacy & Security --> Location Mode

Depending on the Android device you are using, this submenu may be slightly different.

If you have carried out step 1 correctly, then it is "active". Now touch "Search method". In any case, select the following setting here: GPS, WLAN and mobile networks

This has enabled the highest location accuracy and Jurassic World Alive should no longer cause the GPS signal error.

Update AGPS data

If no GPS signal has been found for Jurassic World Alive, you may need to update the AGPS data. Unfortunately, such a feature is not available in Android, so you will need to use the following app:

• Download GPS test from the Google Play StoreDownload GPS test from the Google Play Store

If you have installed the app on your Android smartphone, please open it. If you have not already done so, switch the GPS of your smartphone to "On".

Now open the menu in the app GPS-Test. Select "Settings". You are now in the menu for the app settings. There you will find two buttons at the top.

Now press:

• Clear AGPS
• Update AGPS

You have successfully reset the A-GPS data on your Android smartphone and loaded the new data. Restart your phone and open Jurassic World Alive.

The GPS signal error should no longer be present. These tips should help you create a GPS signal at Jurassic World Alive.

We also recommend that you activate the GPS connection outdoors. Here you can reach a GPS fix faster.

The contacts app on the Samsung Galaxy A6 is automatically sorted by first name at the factory and displays it in the list. However, if you use the Samsung Galaxy A6 for business most of the time, it can be useful and practical if your contacts are sorted and displayed by last names rather than first names.

In the Contacts app there is such a setting, with which you can sort the contacts by last name and also display them.

We will now explain where to find and activate this setting on the device in the Contacts app:

Open the Contacts app, then tap on the three items in the top right-hand corner and select "Settings" from the context menu:

• First select "Sort by" and set the option to "Last Name"
• Then select "Last Name Format" and then press "Last Name, First Name".

From now on your Samsung Galaxy A6 contacts will be sorted by last name in the Contacts app and displayed in the list with them.

If you have a mobile phone contract with a monthly data limit, you can set this data limit in the Android settings so that it cannot be exceeded or that you can always see how much data has already been used.

The monthly data limit can be set in the following submenu of the Huawei P20 Pro:

1. Open the settings of the Huawei P20 Pro

2. Then navigate to: Wireless & Networks --> Mobile Data

3. Here you see a gear symbol in the upper right corner. Select it to view more settings.

4. Set a "Monthly data limit" - enter number in MB or Gigabyte

5. set start date - from when the data consumption should be counted. Here you should consider the billing period of the data volume on the part of the mobile phone provider.

 You now know how to set a monthly data limit on the Huawei P20 Pro.

If you own an OnePlus smartphone, the performance of the device may not be as good as it was at the beginning. This is usually caused by an overfilled cache, which consists of old temporary system files, for example.

To clear this cache and make OnePlus faster again, it is advisable to perform a wipe cache partition from time to time. We would like to explain how this works in more detail here:

Wipe Cache on an OnePlus Smartphone

Note: It is always advisable to make a backup of the data in advance!

1. First, turn off the OnePlus smartphone completely
2. Press and hold the Power and Volume Quieter buttons at the same time to turn it on.
3. Keep these two buttons pressed while the OnePlus start screen is displayed.
4. You cannot release the two buttons until the OnePlus logo disappears.
5. After a short while, the recovery mode should now start
6. Select your language
7. Navigate with the volume buttons to "Clear data and cache" and then to " Wipe Cache"
8. Select the option by pressing the power button once Wait until the OnePlus smartphone has executed the wipe cache partition.
9. Next, select Restart from the menu. Ready!

This should make your phone run faster, smoother and use less battery power.

Resetting to factory defaults completely erases all data present on the Huawei P20 Pro and reloads the Android operating system. This procedure is used if you have serious problems with the Android system and cannot get it under control elsewhere.

But even if you are selling the device, you should delete all data and carry out a factory reset: There are two ways to reset the Huawei P20 Pro to factory settings. One simple one directly via Android and another one via the recovery menu.

The variant via the recovery menu is used whenever Android can no longer be booted or if you have forgotten the unlock method, such as pin, password or pattern.

Reset the Huawei P20 Pro to the factory default settings

1. Start from the home screen and navigate to "Settings"

2. Then go to: System --> Reset --> Reset to factory settings

3. Select "Reset" here as confirmation and all data will be deleted and the smartphone will be reset to factory settings.

The Huawei P20 Pro will then automatically restart and the Android Setup Wizard will start.

If you can no longer access your Huawei P20 Pro via Android as described above, for example because the password has been forgotten or the OS does not boot, then proceed as follows:

Reset via the recovery menu

First switch off the smartphone and then follow these steps: To switch on the device, press the following keys simultaneously:

• Power-Button
• Volume-Up

Hold the keys until the Huawei logo appears and then the EMUI symbol. You will then see the Recovery menu, in which you can navigate as follows:

• Volume keys --> up or down
• Power On/Off --> Confirm

Select "Wipe Data/Factory Reset" and confirm the selection with the Power button. Then select "Restart now".

Your Huawei P20 Pro will now be reset to factory settings. You have now learned how to perform a hard reset on the Huawei P20 Pro and reset the phone to factory settings.

Sometimes it is necessary to write text on your Huawei P20 Pro, in which a paragraph mark § appears. This sign is integrated in many laws and indicates the paragraph.

How to write this character with the keyboard pre-installed on the Huawei P20 Pro is explained below:

Writing paragraph marks with the Huawei P20 Pro - Instruction

1. Open an app, in which the keyboard is shown

2. Tap the button "123" at the bottom left

3. Continue with the button with "{&="

4. Here you now see the paragraph mark in the bottom line - type it, to write it

You now know how to write a paragraph mark § very simply with the keyboard of the Huawei P20 Pro.

How to save on an Android Wear 2.0 Smartwatch battery. The easiest way to do this is usually with the energy-saving mode.

If you have already heard of it, but do not know exactly how to set it up on your Smartwatch, then we would like to help you here. And the energy saving mode can significantly help you to save battery power. And so the mode can be activated under Android Wear 2.0:

Save battery with Android Wear 2.0

1. Open the settings of your Smartwatch
2. Navigate to "Battery"
3. Use the slider to activate the "Smart Power Saving" option

This menu now also shows you how long the watch will run in the just activated mode and the remaining battery capacity.

You now know how to save battery power on an Android Wear 2.0 Smartwatch with the intelligent energy saving function.

If you have a Smartwatch with Android Wear 2.0, you probably want to connect the device to your PC or smartphone in order to backup the data or install apps etc. If this does not work correctly for you and you cannot connect to a computer, debugging will help you.

How to activate this on your Android Smartwatch is explained in the following step-by-step instructions:

• Activating Wi-Fi debugging under Android Wear 2.0

To do this, you must first activate the developer options on your Smartwatch, if this has not already been done. Activate developer mode

1. Change to the settings on your Smartwatch by wiping from top to bottom and then selecting the gear symbol
2. Scroll down in the menu until you see the entry "System" - Select the menu item from
3. Tap the entry "Build number" at least seven times. As a result, the developer options are unlocked on the smartphone. You see an insertion with "You are now a developer".
4. Wipe twice to the right to switch to the developer options menu Enable Wi-Fi debugging Open the clock settings and then go to developer options --> Debug via Wi-Fi

After a moment the IP address of the clock is displayed (e.g. 192.168.1.100). This enables Wi-Fi debugging and allows you to connect to the clock over the wireless network. We hope this guide has helped you to connect your phone or PC

Many new smart watches already have the new Android Wear 2.0 on board or were recently updated. Android Wear 2.0 is the operating system that runs on the clock and provides the user interface. As usual with Android, you can also unlock the so-called developer options under Android Wear 2.0.

This is a hidden menu in the settings, which, as the name suggests, is actually only available to developers. However, this menu can be activated relatively easily under Android Wear 2.0.

We have described how to do this step by step in this manual: Activate developer mode in Android Wear 2.0

1. Change to the settings on your Smartwatch by wiping from top to bottom and then selecting the gear symbol
2. Scroll down in the menu until you see the entry "System" - Select the menu item from
3. Tap the entry "Build number" at least seven times. As a result, the developer options are unlocked on the smartphone.

You see an insertion with "You are now a developer". Wipe twice to the right to switch to the developer options menu The developer options can now be exited by restarting the Smartwatch once.

You now know how to unlock and activate the developer options on a Smartwatch with Android Wear 2.0.